Mitsubishi Electric Visual and Imaging Systems

USA – Mitsubishi Electric Visual and Imaging Systems


Vídeo Wall



LED Front Access Rear Projection Wide Format Slim Cube

60", 1920 x 1080 (Full HD)


60″ Full HD LED slim display wall cube

Based on the same unique LED light source technology as its widely-used Seventy Series DLP™ cubes, the new cube offers significant economies in both its space requirement and cost of ownership.

Until now, the only practical option for large format control room display in restricted spaces such as crisis suites and breakout rooms has been tiled LCD. However, LCD is not ideal for 24/7 operation and in many cases the intrusive bezel can prove distracting to operators. Mitsubishi Electric’s VS-60HS12 provides an elegant solution, offering both a near-seamless high-resolution display and true, zero-maintenance 24 hour operation in a compact footprint.

The 60” diagonal DLP rear projection cubes measure just 520 mm deep, nearly half that of Mitsubishi’s Seventy Series cubes. Being solely front access means the VS-60HS12 can be installed flush to the wall, with no rear access required. The LED projection engine employs the same patented air-cooled light source technology as Mitsubishi’s high-specification Seventy Series, and requires no maintenance over its entire lifespan of approximately 50,000 hours. Based on a 0.65” Digital Mirror Device (DMD®), the display delivers up to 660 cd/m² at 1080p resolution, enhanced by Mitsubishi’s patented Colour Space Control and Digital Graduation circuitry. The displays are also completely self-balancing, ensuring correct color balance across the wall automatically.

VS-60HS12U Features

  • 60″ Full HD
  • Lifetime 60,000 hrs
  • Up to 700cd/m²
  • Air cooling (no liquid)
  • Front access only

No burn-in and near-zero bezel design using DLP™ technology
The 0.65 DLP® chip is a reflective imaging device that is not affected by heat absorption, even when projecting a fixed pattern over a long period of time. Its durability and imaging quality are the best option among displays, especially for 24/7 operating environments.

The VS-60HS12U slim display wall cube is is equipped with three built-in sensors (one for each primary color) that use a color and brightness maintenance algorithm. The sensors continually monitor the individual red, green and blue output of each display wall cube, share the data with adjacent cubes, and adjust performance automatically to produce extremely accurate colors and brightness balance over the entire display. These features make it possible to maintain image uniformity on multi-screen configurations over long periods of operation without using external software or a computer.

Para compensar as inconsistências de cor e de brilho, em cubos de LED para Display Wall, a Mitsubishi Electric desenvolveu um circuito de balanceamento que uniformiza e combina as cores. As taxas de cada cor primária (vermelho, verde e azul) e outras misturas de cores são ajustadas para fornecer combinações de cor consistentes e uniformidade superior em configurações com múltiplas telas.

A diminução do brilho nas arestas das telas de visualização não é mais um problema graças ao inovador circuíto de gradação digital da Mitsubishi Electric. A distribuição do brilho é uniforme por todas as telas, o que garante a reprodução de imagens nítidas e vivas, de um extremo ao outro em configurações com múltiplas telas.

Learn more about this product. Request a proposal.

Display Type:
  • Rear Projection
Service Access:
  • Front Access
Display Technology:
  • DLP™ technology (0.65” DLP™ 1 chip) DarkChip3™
  • BrilliantColor™
Native Resolution:
  • 1920 x 1080 (Full HD)
Screen Size:
  • 60 Diagonal Viewable
Contrast Radio:
  • 1000:1
Light Output:
  • 730 ANSI Lumen @ BRIGHT mode
  • 700 cd/m2 @ Bright Mode
  • 560 cd/m2 @ Normal Mode
  • 280 cd/m2 @ Eco Mode
Viewing Angle:
  • Horizontal: 1/2 gain +/- 35°; 1/10 gain +/- 57°
  • Vertical: 1/2 gain +/- 10°; 1/10 gain +/- 28°
Mullion Size:
  • Horizontal 1.0mm - 2.5mm / Vertical 1.0mm - 2.0mm
RGB Input Scanning Frequency:
  • Resolution: VGA (640 x 480) – WUXGA (1920 x 1200)
  • Horizontal: 31.5kHz – 92kHz
  • Vertical: 49Hz – 85Hz
Pixel Clock Rate:
  • 25MHz – 165MHz
Control Signal Inputs:
  • RS-232C: D-Sub 9 pins
  • LAN RJ45 x1
  • D-Sub 9 pins x 2 (input, output) Mitsubishi original control link
  • Wired Remote: F3.5 Jack
  • IR Receiver
Input Terminal:
  • Digital Analog RGB DVI-I (DVI 1.0/HDCP) x1
Light Source
  • LED (RGB)
Estimated Lifetime:
  • 60,000 Hrs @ Estimated Lifetime
  • 132 lbs.
Dimensions (WxHxD):
  • 52.6" (W) x 37.5" (H) x 20.5" (D)
Power Consumption:
  • 170W @ Bright Mode
  • 140W @ Normal Mode
  • 70W @ Eco Mode
Voltage Range:
  • AC 100 - 240V +/-10%, 50/ 60Hz +/-1Hz lbs.
Thermal Dissipation:
  • 420 BTU/h @ Bright Mode
  • 328 BTU/h @ Normal Mode
  • 208 BTU/h @ Eco Mode
Temperature and Humidity:
  • Condition at Operation:
  • 50°F-86°F (10°C-30°C) 20-80% non-condensing
  • Condition at Storage:
  • -4°F-122°F (-20°C-50°C) 20%-80% non-condensing
Safety Approval:
  • UL60950-1
  • CSAC22.2 No.60950-1
  • EN60950-1
  • GOST IEC 60950-1
  • IS 13252 (Part 1)
  • K60950-1
  • AS/NZS60950.1
  • GB4943.1
  • FCC part15 Subpart B Class A
  • ICES-003 Issue No.5 Class A
  • EN55022 Class A
  • EN55024
  • EN61000-3-2
  • EN61000-3-3
  • GOST R 51318.22 (Class A)
  • GOST 30805.24
  • GOST R 51318.24
  • GOST R 51317.3.2
  • GOST R 51317.3.3
  • KN22 Class A
  • KN24
  • AS/NZS CISPR 22 Class A
  • GB9254 Class A
  • GB17625.1
  • VCCI Class A
  • JIS C 61000-3-2
Service & Support
  • 2-Year Limited Parts and Labor Warranty.
  • 2-Year Limited Original LED-pack Warranty.
  • (*) Depending on configuration and environment 2.0 mm (Horizontal) and 1.5mm (Vertical) recommended for large walls to allow for expansion due to heat and humidity.

Specifications are subject to change without notice.

Accessories (Optional)

No Accessories Available for this product
Brochure 781.10 KB