Mitsubishi Electric Visual and Imaging Systems

USA – Mitsubishi Electric Visual and Imaging Systems

enpt-br

Video Wall

LM55P2

LM55P2

LED-backlit LCD Monitor with Super Narrow Bezel

55", 1920 x 1080 (Full HD)

Mitsubishi LED Backlit Monitor

Mitsubishi’s most advanced LCD video wall display yet – the ultra narrow bezel LM55P2 features superb high-definition display and wafer-thin bezel. LCD monitors provides a smooth flow of information for around-the-clock environments and supports 24/7 continuous operation.

Featuring an innovative bezel design measuring just 3.5mm in total, a simple 2 x 2 configuration of the 55” displays can be daisy-chained together via the in-built DisplayPort™ 1.2a input to easily create an impressive 4K video wall (3,849 x 2,160 pixels) with no external processing required.

Powerful built-in processing allows sophisticated multi-window displays to be created for exceptional versatility. Two layered images can be displayed simultaneously for Picture-in-Picture or Picture-by-Picture displays. The sub-image can be positioned as desired for maximum clarity.

The LM55P2 features Mitsubishi Electric’s Dynamic Brightness Balancing which provides a built-in brightness sensor that makes measurements every 2 seconds. The Dynamic Brightness Balancing circuit then communicates the brightness data to all of the monitors and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall.

The L55P2 is fully equipped with a range of digital input terminals, including HDMI x1, DVI-D x1, DisplayPort x1.2a and Intel® OPS Slot x1. A wealth of other features such as programmable power management, digital zoom, screen-saver and closed-caption capability makes the L55P2 extremely versatile and cost-effective to operate.

Additional Features

NEW: Ultra-thin 3.5mm bezel and 4K with DisplayPort™ 1.2a.
Innovative bezel design measuring just *3.5mm in total, a simple 2 x 2 configuration of the 55” displays can be daisy-chained together via the in-built DisplayPort™ 1.2a input to easily create an impressive 4K video wall (3,849 x 2,160 pixels) with no external processing required.

NEW: Dynamic Brightness Balance
Each Mitsubishi ultra narrow bezel LCD Display Monitor is equipped with a built-in brightness sensor that makes measurements every 2 seconds. The Dynamic Brightness Balancing circuit then communicates the brightness data to all of the monitors and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall.

NEW: Picture-in-Picture feature​
Two images can be easily layered and displayed on a single screen, with the sub-display movable to a user-desired location allowing optimal display of both screens.

Frame compensation supports up to 25 displays in 5×5 configuration to avoid image distortion at the seams, ensuring image accuracy when spread across multiple screen displays.

Learn more about this product. Request a proposal.

Display
Display Type:
  • LCD Display Wall
Display Orientation:
  • Landscape / Portrait
Display Technology:
  • TFT LCD with LED backlight
Native Resolution:
  • 1920 x 1080 (Full HD)
Screen Size:
  • 55" Diagonal Viewable
Contrast Radio:
  • 3500:1
Brightness:
  • 700 cd/m2 @ Highbright Mode
  • 500 cd/m2 @ Standard Mode
Response Time:
  • 8ms (typ. G to G)
Backlight:
  • LED (Direct)
Viewing Angle:
  • Horizontal: 178°
  • Vertical: 178°
Mullion Size:
  • Bezel-to-Bezel 3.5mm (Typ.) / Active Display-to-Active Display 3.9mm (Typ.)
Interface
RGB Input Scanning Frequency:
  • Horizontal: 15.625/15.734/31.5kHz – 91.1kHz
  • Vertical: 58.0Hz – 85Hz @ Digital Input
  • Horizontal: 31.5kHz – 91.1kHz
  • Vertical: 58.0Hz – 85Hz @ Digital Input
Optional Input Signals (x3 slots):
  • VC-B70D2 - Input Board for Digital RGB Signals (DVI-D with HDCP x 2)
  • VC-B70DA2 - Input Board for Digital RGB Signals (DVI-D with HDCP x 2)
  • VC-B70G2 - Input Board for Analog RGB Signals (5 BNC x 1 / D-Sub mini 15 pin x 1)
  • VC-B70V2 - Input Board for Analog Video Signals (3 BNC x 2)
  • VC-B70DC - Input Board for Daisy Chain (D-Sub 15 x 1 / DVI-D with HDCP x 1 / 3 BNC x 1; Daisy chain output, no HDCP DVI-D x 1)
  • VC-B70SD1 - Input Board for SDI Signals (BNC x 1; through output BNC x 1)
Video Signal Inputs:
  • DVI-D (with HDCP) x1
  • HDMI x1
  • DisplayPort (1.2a) x1
  • D-Sub mini 15 pin x1
  • Composite (BNC Y shared with component video) x1
  • Component (YPbPr) BNC x1
Video Signal Outputs:
  • DVD-D (with HDCP) x1
  • DisplayPort (1.2a) x1
Control Signal Inputs:
  • RS-232C x1 (input, output)
  • ø3.5mm stereo mini jack (input, output) x1
  • LAN RJ45 x1
Physical
Weight:
  • 77 lbs.
Dimensions (WxHxD):
  • 47.8" (W) x 26.9" (H) x 5.1" (D)
Power Consumption:
  • 200W @ Highbright Mode
  • 170W @ Standard Mode
Voltage Range:
  • AC 100 - 240V +/-10%, 50/ 60Hz +/-1Hz lbs.
Thermal Dissipation:
  • 683 BTU/h @ Highbright Mode
  • 580 BTU/h @ Standard Mode
Misc
Temperature and Humidity:

Condition at Operation:

  • 41°F-95°F (5°C-35°C)
  • 20-80% non-condensing

Condition at Storage:

  • 4°F-122°F; (-20°C-50°C)
  • 20% - 80% non-condensing
Safety Approval:
  • UL60950-1
  • CSAC22.2 No.60950-1
  • EN60950-1
  • K60950-1
  • AS60950-1
  • GB4943
  • IEC60950-1
  • CNS14336
EMC:
  • FCC part15 Subpart B Class A
  • ICES-003 Issue No.4 Class A
  • EN55022 Class A
  • EN55024
  • EN61000-3-2
  • EN61000-3-3
  • AS/NZS CISPR 22 Class A
  • VCCI Class A
  • JIS C 61000-3-2
  • 50948-2001
  • 51318.22-99 (Class A)
  • 51318.24-99, 51317.3.2-2006 (Parts 6, 7)
  • 51317.3.3-2008
  • CNS13438 Class A
Service & Support
Warranty:
  • 3-Year Limited Parts and Labor Warranty.
  • Available Express Replacement Assistance program.

Accessories (Optional)

VC-LM1HD

View Image
Display Type:
  • OPS Module

DP-01RK

View Image
Display Type:
  • Remote Control Kit
Extra Accessories:
  • Quick start guide
  • Remote Control
  • 1.5V AAA battery (x2)
  • IR Sensor Cable
  • Pad
  • Label Button
Product Specifications:Specifications 1.40 MB

DP-1SDI-3G

View Image
Display Type:
  • SDI Box

BR-LM1KK

View Image
Display Type:
  • Wall Mount Bracket
Dimensions:
  • 18.7" (W) x 22.9" (H) x 4.3" (D)
Weight:
  • 33 lbs
Extra Accessories:
  • User’s manual
  • Quick start guide
  • Hook (1 pc.)
  • Bolt for securing the wall mount bracket and hook
    (Cap-screw, M6, 6 pcs.)
  • Washer for securing the wall mount bracket (Φ 25, 4 pcs.)
Product Specifications:Specifications 261.08 kB
Documents
Brochure 593.12 kB